Downspike
Kendama Entertainment Network

A community for the balanced lifestyle.

Alcohol!!!!

Discussion in 'The Lumber Yard' started by ttocsic, Nov 20, 2017.

  1. ttocsic

    ttocsic Slayer

    Joined:
    Sep 28, 2017
    Location:
    Atlanta, GA
    the rubbing kind, I mean, rubbing alcohol...

    I recently watched a review of Wyatt Bray's mod by @Nick Dodenhoff (great review BTW) and he said that a way to retain the stick on sticky paint is by using a dry towel, put some rubbing alcohol on it and rub on the tama and it will bring back its original tack.

    So... I tried it on my TJ mod and IT WORKED SO WELL!! It was amazing how it brought the tama back to its prime tackyness.

    Is this a common method used on sticky paints?

    Have you used it on other sticky paints? How did it work out?
     
    Nov 20, 2017
    Jedi_man, slothymane and Sir Spike like this.
  2. Sir Spike

    Sir Spike Slayer

    Joined:
    Jun 6, 2017
    Location:
    Michigan
    I’m so stoked that worked for you. I’m going to try that on my sweets prime when I get home.
     
    Nov 20, 2017
    ttocsic likes this.
  3. ttocsic

    ttocsic Slayer

    Joined:
    Sep 28, 2017
    Location:
    Atlanta, GA
    Awesome! let me know how it works out;)
     
    Nov 20, 2017
  4. azleonhart

    azleonhart Moderator Staff Member

    Joined:
    Oct 12, 2016
    Location:
    Kuala Lumpur, Malaysia
    Yep, rubbing alcohol works wonders!
    Based on what i know, rubbing alcohol efficiently removes oils from the paint (it’s a solvent), returning it to its former glory.
    But be sparing with the uses. Enough times of applying it can cause the coat to be stripped away over time.
     
    Last edited: Nov 20, 2017
    Nov 20, 2017
  5. Sir Spike

    Sir Spike Slayer

    Joined:
    Jun 6, 2017
    Location:
    Michigan
    Worked great on my prime and krom x beams.
     
    Nov 20, 2017
    ttocsic likes this.
  6. ttocsic

    ttocsic Slayer

    Joined:
    Sep 28, 2017
    Location:
    Atlanta, GA
    Glad to hear it!
     
    Nov 20, 2017
  7. ttocsic

    ttocsic Slayer

    Joined:
    Sep 28, 2017
    Location:
    Atlanta, GA
    thanks for that info, because if you hadn't told me I probably would have taken the coat off with too many uses;)
     
    Nov 20, 2017
  8. azleonhart

    azleonhart Moderator Staff Member

    Joined:
    Oct 12, 2016
    Location:
    Kuala Lumpur, Malaysia
    Alcohol, by nature is a solvent.
    It strips the oil off, but also runs the risk of slowly stripping the coat off, with each use.
    I don’t know exactly how many times until you completely strip the coat away, so you may wanna reduce it to as less uses possible, and try not to rub too hard on the tama.
    Gently apply the rubbing alcohol, and follow quickly with a dry wipe. Don’t let the alcohol evaporate, if possible.
     
    Nov 20, 2017
    ttocsic likes this.
  9. lategreat808

    lategreat808 DS Legend

    Joined:
    Dec 5, 2016
    Location:
    Eau Claire, Wisconsin
    I am definitely going to try this. Makes a lot of sense really.
     
    Nov 21, 2017
    ttocsic likes this.
  10. Sam Strohmyer

    Sam Strohmyer Slayer

    Joined:
    Jan 21, 2017
    My Reed Stark Mod is about to get some love. THX bois.
     
    Nov 21, 2017
    ttocsic likes this.
  11. slothymane

    slothymane Slayer

    Joined:
    Sep 28, 2017
    Location:
    Austria
    Wiped down my Slaydawg yesterday. Damn boi forgot how sticky it was
     
    Nov 22, 2017
    ttocsic likes this.
  12. goenKendama

    goenKendama Administrator Staff Member

    Joined:
    Oct 14, 2016
    Location:
    Metro Manila, Philippines
    You might want to test it on a small area near the string hole, or wherever you don't balance, just to see what it does to the finish before going all out. Coatings have been know to come off with as mild a cleaning as baby wipes. Just sayin'.
     
    Nov 23, 2017
    LifeDeLicious, ttocsic and Jasper B. like this.
  13. Nick Dodenhoff

    Nick Dodenhoff Member

    Joined:
    Dec 22, 2016
    Location:
    Woodstock, GA, USA
    Glad it helped! 4 Quick notes:
    While this works well on sticky tamas, I have not found it to work well on others like cushion, silk, or rubber.
    Secondly, DON'T OVER DO IT. Even lower percentage running alcohol WILL damage the paint over time.
    Third. Use a LIGHT amount when applying, you don't want the tama dropping wet.
    Finally, my best experience is with 70%. DO NOT USE ANYTHING HIGHER UNLESS YOU DON'T WANT PAINT ON YOUR TAMA.
    Thanks guys!
     
    Dec 9, 2017
    Allen Ku, ttocsic and Jasper B. like this.
  14. KeeganS

    KeeganS DS Legend

    Joined:
    Dec 6, 2016
    Location:
    Boise, Idaho
    What exactly happened to the cushion and silk tamas?
     
    Dec 11, 2017
  15. ttocsic

    ttocsic Slayer

    Joined:
    Sep 28, 2017
    Location:
    Atlanta, GA
    I did it to my silk tama, and it didn't seem to have much of an effect. Maybe made it a little less grippy but certainly not very noticeable.
     
    Dec 11, 2017
  16. Jasper B.

    Jasper B. Slayer

    Joined:
    Dec 5, 2016
    Location:
    San Diego
    This is the most helpful post here! thanks!
     
    Dec 11, 2017
    ttocsic likes this.